The Buzz is All About Mini-Motorcycles
February 29, 2008
Pocket bikes are miniature motorcycles — powered, for the most part, by oil- and gas-burning engines similar to those used in chain saws, weed whackers or other small motorized tools — and they look just like the real thing.
The snazziest models cost thousands and are made in Italy, but the ones that are selling by the container load run from $200 to $500. They come from China, among other places, and are getting snapped up by eager teenagers and, in some cases, not-so-teenagers.
At Broadtek LLC, a South San Francisco firm that imports them, the cardboard cartons containing the small bikes are stacked to the ceiling of a tall warehouse and are quickly going out the door to eager customers.
In Walnut Creek, Eric Rahin, owner of Sonic Scooterz, says he’s selling them in droves — “from college students to people in their late 50s. It’s basically a toy to have some fun with.”
Manufacturers say the bikes are supposed to be used only on closed race tracks, private roads or any other place where there are no public traffic laws and, more important, no big cars or trucks to run into you. Many buyers follow that advice.
Fuel Cells Motorcycles, Trucks, Tanks, ATVs and Fire Hazards from Heat Exchanges
February 15, 2008
We have heard a whole lot of talk about fuel cells and of course it is a worthy endeavor. Portable generators, cars, transportation industry, Power generators, Ships, etc. can benefit. However in a mobile application such as a shuttle bus, car, truck, train, tractor, motor scooter or even a Segway air-cushioned platform mover, there is the problem of heat. The heat occurs on transfer of fuel. So if we are talking about a portable application the heat can make steam and the steam can be used for additional power needed also. In an off road application when we are in places of drought and extreme fire hard there is a significant problem which needs to be better addressed with the material sciences to control the heat. Everyone knows that 2-cycle motorcycles get hot and can cause fires if you are not careful.
The hydrogen cell problem with it’s temperatures could be significantly worse. In larger vehicles there have been ways to mitigate this, with additional insulation panels, however in a small off road vehicle or ATV, the problem becomes more significant. When I speak of ATV, I mean All-terrain vehicle, not the Fuel Cell term of Advanced Technology Vehicle. At Texas A and M. they are working on just such a project.
Online Shopping for Motorcycle Accessories
February 1, 2008
When shopping for a certain item and material, the way to do it is to shop like a woman. Who else knows how to shop till they drop but women, right? Isn’t it that husbands, partners, spouses and lovers often complain about the amount of time and the energy given to shopping by their women even for just one item they need?
But who else gets the most of their budget, and takes home the item of high grade quality at the least price possible? Women. Women are known to have the intuition for great sales and wonderful bargains just because they give time and effort in looking for the item at the best price.
Same thing with motorcycles. When you need to buy performance motorcycle parts accessories, we know that our local motorcycle parts store is a great place to begin with. Aside from being near our home, our familiarity with our local store will help reduce the time it takes to choose the accessory most suitable to our requirement.
Workings of a Motorcycle Muffler Suspension
January 18, 2008
Motorcycles are becoming more popular because of its convenience and relatively inexpensive cost compared to automobiles. They are capable of the same speeds as cars and can also be licensed for use on public highways.
Owners and drivers of motorcycles opt for these motorized, two-wheeled vehicles as transportation because aside from it being an inexpensive alternative to cars, they can be easily maneuvered and they deliver higher fuel economy. In addition, they take less space for parking. No wonder a lot of Asian countries have more motorcycles than cars.
And for drivers who love speed, motorcycles are great vehicles because they can accelerate more quickly than an automobile. Nevertheless, motorcycles are not for everybody. Riding and controlling this vehicle requires skill and extra caution especially during difficult maneuverings on wet or slick surfaces.
But when you do get the urge to ride a motorcycle, you would want to learn a lot of information on the vehicle, like “Where do I start?”; “How do I start my motorcycle?”; “Do I need to shift gears?” “If so, how do I do it?” And most of all, any beginner would want to know first the makings and basic parts of a motorcycle and how they work.
Save Money on Used Motorcycle Parts
January 4, 2008
For every motorcycle enthusiast, it is indeed very taxing to maintain bikes as good as new ? its engine running and all its other parts functioning. We know for a fact that it’s not only for the sake of transportation but also for a little satisfaction of our vanity ? seeing everyone admire us, atop an excellent piece of machine. Like any road going vehicle, a motorcycle’s performance is based on the smooth running of thousands of parts, large and small. It is a nuisance indeed to find some faulty parts on a vehicle and prevent owners from enjoying its full use.
Broken parts on a motorcycle can spell tragedy for its driver and extensive damage to the machine. In a motorcycle, the safety and security provided by a four wheel vehicle on each corner doesn’t exist as such, when its rear wheel locks up at 70 mph it could skid out of control and throw its rider. What’s more heartbreaking is to know that the cause of the accident is because of a broken part.
Necessity of Motorcycle Parts
December 21, 2007
If you are one of the many people who consider your bike as invaluable as your family, then we know you’re head over heels. We may be judged heavily for this perception but you might even be willing to dump your partner just so you could spend time riding and caring for your bike? though, we hope you are not that obsessed.
Of course, once you’ve discovered the thrill and speed of the open road, there’s really nothing quite alike the exuberance you felt. Eventually, it will not only be a way to travel for you, it becomes a way of life. Many other motorcycle enthusiasts discover these at certain stages after acquiring their motorcycles. You find these dedicated enthusiasts like yourself all over the country.
It’s no surprise to know that you would also demand nothing but the best motorcycle parts for your bike. Getting the right motorcycle parts is not only a matter of vanity or style. Necessity is the most important consideration. Once you do not have sturdy replacements for important parts and even accessories like worn brakes, cracked windshield, bent kickstand, you’re in trouble. All the more worse if your local parts store has no replacement parts available. Most motorcycle parts should be found not to make your bike look nice and sleek. You simply can’t afford to be without these motorcycle parts which are equal to that of our limbs and joints.
How Do You Make Your Harley Davidson Look And Feel Like An Extension Of Yourself!
December 6, 2007
How do you make your Harley Davidson look and feel like an extension of yourself!
Do you think maybe it’s time to do a little customizing for that old girl of yours? Ask yourself this first.
Why do we customize and add accessories to our Harley?
Well, for me it’s simple!
We want to stand out above all else! The last thing we want is to look like every Tom, Dick, and Harry out there on the road!
You may have different reasons. You may want to add an Accessory to your bike because it fits with you and your taste.
There is an element of being practical as well. If you install a nice chrome luggage rack on your back fender, or a detachable windshield, it not only looks good but it also serves a purpose. How else would you carry your tent and keep bugs out of your teeth?
Not everyone has the same taste in customizing. Thank God for that, or it sure would be boring taking a walk down on main street in Sturgis South Dakota during the 1st week of August.
Suzuki Motorcycles - From Fine Loom Manufacturers to Major Motorcycle Company
November 21, 2007
Started in a small warehouse by Michio Suzuki back in 1909, Suzuki aimed at making better looms for the Japanese silk industry. It was only thirty years after its existence that the company started thinking of diversifying into cars, motorcycles and related machinery. In fact, it was only after the collapse of the cotton market in 1951, that Suzuki seriously got into the motorcycle and car industry.
One of the first two-wheeled innovations by Suzuki was a motorized bicycle called the “Power Free”. This bicycle was so ingeniously designed that the government of Japan gave Suzuki a subsidy in order to continue their research in motorcycle and car innovation. As time progressed, the company started to build better and better motorcycles. And by 1962, Suzuki Motorcycles had won their first 50cc Grand Prix World Championship.
By the late 60s, the company had become known and respected in the American and European motorbike world. One of their best-selling machines during this time period was the Suzuki X-6 Hustler, which was the fastest Japanese 250cc for that time.
So You Want To Be A Custom Bike Builder? Start With A Motorcycle Kit!
November 7, 2007
So you want to be a custom bike builder? Well friend, before you rush out and buy that motorcycle kit, the one that will set you on the road to riches and fame, stop and think about the level of expertise and artistry the top builders have attained. More importantly think about how long it has taken them to attain it! Let’s look at a few key issues?
Education
You’d be surprised how well educated a lot of today’s top bike builders are. Several of them have degrees (some more than one!) ranging from mechanical engineering to business and marketing management. Billy Lane, the founder of Chopper Inc, has several patents relating to motorcycle technology in his name for example. What about someone a little more "old school" like Dave Perewitz? Dave has accumulated close to forty years of mechanical, metalworking and painting experience. Not theoretical, but genuine hands on, early morning late night kind of experience. Could you put that kind of time in? Matt Hotch is still only young, but has gained an incredible amount of practical experience customizing first bicycles, then VW’s before moving on to custom bike building.
Facilities
Do You Need a Part for Your Harley Davidson Motorcycle?
October 24, 2007
Need a Harley Davidson Part for your ride?
Where do you get a good quality Harley Davidson Part? Can I use an aftermarket part?
These questions are not easy to answer. It depends a lot on your situation, part you’re looking for, and the money you want to spend.
The bottom line……… you have to decide.
I have a little information here that may be useful to you, so keep reading!
An OEM part versus an aftermarket part.
An OEM (Original Equipment Manufacturer) part are of course the genuine Harley Davidson Part you would find at an authorized Harley dealer.
These parts are original in that they have the exact same specifications that came with the original part.
These parts however many not have been manufactured by Harley Davidson themselves (at their physical location). Harley may get another company to manufacture these parts to Harley specs, and then they will sell them in the Harley box as OEM.
OEM parts are generally more expensive, and almost always recommended by the dealer. (They make their money by selling parts not bikes)




















